SMB/SMC/SMA series diodes are packaged by a PN junction with corresponding electrode leads and tubes.
Using different doping processes, the P-type semiconductor and the N-type semiconductor are made on the same semiconductor (usually silicon or germanium) substrate through diffusion, and the space charge region called PN junction is formed at their interface.
The electrode led by the P region is called the anode, and the electrode led by the N region is called the cathode. Because of the unidirectional conductivity of the PN junction, the current direction of the diode is from the anode to the cathode through the inside of the tube.
The circuit symbol of the diode is shown in Figure 1. The diode has two electrodes, the electrode led by the P region is positive, also called anode; The electrode led by the N region is the negative electrode, also known as the cathode. The direction of the triangular arrow indicates the direction of the forward current, and the text symbol of the diode is represented by VD.

SMB/SMC/SMA series diode working principle
The main principle of the diode is to use the one-way conductivity of the PN junction, and add a lead and package to the PN junction to become a diode.
The crystal diode is a PN junction formed by P-type semiconductor and N-type semiconductor, which forms a space charge layer on both sides of its interface and has a self-built electric field. When there is no applied voltage, the diffusion current caused by the difference of carrier concentration on both sides of the PN junction and the drift current caused by the self-built electric field are equal and in electrical equilibrium.
When there is a forward voltage bias, the mutual suppression of the external electric field and the self-built electric field increases the carrier diffusion current and causes the forward current. When there is reverse voltage bias outside, the external electric field and self-built electric field are further strengthened, forming a reverse saturation current independent of the reverse bias voltage within a certain reverse voltage range.
When the applied reverse voltage is high to a certain extent, the electric field strength in the PN junction space charge layer reaches a critical value, resulting in a carrier doubling process, a large number of electron hole pairs, resulting in a large value of reverse breakdown current, known as the breakdown phenomenon of diodes. The reverse breakdown of PN junction is divided into Zener breakdown and avalanche breakdown.
Principle of PN junction formation
P-type and N-type semiconductors
A P-type semiconductor is an intrinsic semiconductor (a completely pure, structurally intact semiconductor crystal) with a small amount of trivalent elemental impurities, such as boron.
Because the boron atom has only three valence electrons, it forms a covalent bond with the surrounding silicon atom, because of the lack of an electron, a vacancy is generated in the crystal, when the electrons on the adjacent covalent bond get energy, it is possible to fill this vacancy, so that the boron atom becomes an immobile negative ion, and the original silicon atom covalent bond is due to the lack of an electron, forming a hole. But the entire semiconductor is still neutral. The conduction of P-type semiconductor is dominated by holes, holes are the majority of charge carriers, and free electrons are the minority of charge carriers.
The principle of N-type semiconductor formation is similar to the P-type principle. Incorporation of a pentavalent atom, such as phosphorus, into an intrinsic semiconductor. After incorporation, it forms a covalent bond with silicon atoms, producing free electrons. In N-type semiconductors, electrons are the majority carriers and holes are the minority carriers.
PN junction
Therefore, when trivalent and pentavalent impurity elements are added to two different regions of the intrinsic semiconductor, P-type region and N-type region are formed. According to the characteristics of N-type semiconductor and P-type semiconductor, there is a difference in the concentration of electrons and holes at their junction, and both electrons and holes are diffused from the region with high concentration to the region with low concentration. Their diffusion destroys the electrical neutrality of the original junction.
PN junction unidirectional conductivity
Under the positive voltage V applied to the PN junction, under the action of this applied electric field, the equilibrium state of the PN junction is broken, the electrons in the P region and N region move to the direction of the PN junction, the negative ions of the holes and PN junction P region are neutralized, and the positive ions of the electrons and PN junction N region are neutralized, thus making the PN junction narrow. With the increase of applied electric field, the diffusion motion is further enhanced and the drift motion is weakened. When the applied voltage exceeds the threshold voltage, the PN junction is equivalent to a small resistance, that is, the PN junction is on.
Contact: Miss Zhao
Mobile: 15001738747
Email: postmaster@maylandzc.com
Website: www.maylandzc.com
Address: No. 1185, Huyi Road, Jiading District, Shanghai